This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly
Great Planes Cosmic Wind Little Toni Sport Pylon Racer Airplane.
27.5% scale (IMAA legal)
For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: Fiberglass, balsa and plywood
Wing: Balsa and plywood, one-piece
Fuselage: Fiberglass, pre-painted and trimmed
Covering: Top Flite True Red MonoKote, TOPQ0227
Radio Compartment: Plywood reinforced
Wheel Pants and Cowling: Fiberglass, painted to match covering scheme
Canopy: Single, clear
Landing Gear: Pre-painted aluminum .12" (3mm) thick w/ 2.25" (70mm)
diameter foam main wheels, 1.25" (32mm) foam tailwheel,
and pre-bent .08" (2mm) diameter wire tail gear
Aileron Control: Dual servo
Hardware: Full set included
Motor Mount: Nylon adjustable
Fuel Tank: 14.2oz (420cc) rectangular
Spinner: 3" (76mm) aluminum
Building Time: Ready to fly in 12-15 hours

INCLUDES: Pre-built wing fuselage and tail assemblies prebent aluminum main
landing gear, 2 main wheels, tailwheel wire with wheel, engine
mount, hardware package, fiberglass cowling and wheel pants, clear
canopy, decals, aluminum spinner, photo-illustrated instructions,

REQUIRES: Engine: .61 cu in (10cc) 2-stroke
OR .91 (15cc) 4-stroke
Muffler: Stock type supplied with engine, engine mounts at 90° angle
Radio: 4-Channel
Servos: 4-with at least 54 oz-in torque
1-with at least 30 oz-in torque (for throttle)
(2-ailerons, 1-elevator, 1-rudder, 1-throttle)
Servo Extension: Two 6" (152mm)-for ailerons
Y-Harness: One-for aileron servos
Misc. Items: glow plug, ¼" foam rubber padding, 3' medium
fuel tubing, fuel filter, propeller, building and field equipment.

SPECS: Wingspan: 63 " (1600mm)
Wing Area: 775 sq in (50.06 sq dm)
Weight: 7.25 - 8.25lb (3290 - 3740g)
Wing Loading: 21.5 - 24.5 oz/sq ft (65 - 75 g/sq dm)
Length: 56.5" (1435mm)
Airfoil: Fully symmetrical, low-wing configuration


COMMENTS: Pilot head pictured on box is not included. A ¼-Scale Sportsman Pilot
will fit under canopy.
This spinner differs from the one shown in the manual. It includes a
spinner adapter nut that fits the O.S. .61 two-stroke and .91 four
stroke engines. It may be necessary to shorten the length of the
spinner cone attachment bolt depending what propeller you choose.